Carbon Steel Pipe Tolerance and Properties
Diameter – Steel Pipe Tolerance – Seamless And Welded
Nominal Pipe Size Inches | Outside Diameter Tolerances-Inches Or Percent of O.D. | |||||||
---|---|---|---|---|---|---|---|---|
A120(1) | A53 | A106 | API-5L | |||||
Plus | Minus | Plus | Minus | Plus | Minus | Plus | Minus | |
1/8– 11/2 IPS | O.15″ | .031″ | .015″ | .031″ | .015″ | .031″ | .015″ | .031″ |
2-4 IPS | 1% | 1% | 1% | 1% | .031″ | .031″ | 1% | 1% |
5-8 IPS | 1% | 1% | 1% | 1% | .062″ | .031″ | .75% | .75% |
10 IPS-18 OD | 1% | 1% | 1% | 1% | .093″(2) | .031″(2) | .75% | .75% |
20 OD-26 OD | l% | 1% | 1% | 1% | .125″(2) | .031″(2) | 1% | 1% |
(1)Specification A120 has been discontinued. (2)Some mills may require ± 1% of nominal O.D. for sizes over 10í IPS in heavy walls of A 106 pipe.
|
Wall – Steel Pipe Tolerances – Seamless
Nominal Pipe Size Inches | Outside Diameter Tolerances-Inches Or Percent of O.D. | |||||||
---|---|---|---|---|---|---|---|---|
A120(1) | A53 | A106 | API-5L | |||||
Plus | Minus | Plus | Minus | Plus | Minus | Plus | Minus | |
1/8– 21/2 IPS | By Wt. | 12.5 | By Wt. | 12.5 | By Wt. | 12.5 | 20.0 | 12.5 |
3 IPS | By Wt. | 12.5 | By Wt. | 12.5 | By Wi. | 12.5 | 18.0 | 12.5 |
31/2 IPS-26 OD | By Wt. | 12.5 | By Wt. | 12.5(2) | By Wt. | 12.5(2) | 15.0 | 12.5 |
(1)Specification A120 has been discontinued. (2) Some mills may require ± 12.5% of nominal wall for sizes over 10″ IPS in heavy walls of A53 & A106 pipe.
|
Wall – Steel Pipe Tolerances – Welded
Nominal Pipe Size Inches | Outside Diameter Tolerances-Inches Or Percent of O.D. | |||||||
---|---|---|---|---|---|---|---|---|
A120(1) | A53 | A106 | API-5L | |||||
Plus | Minus | Plus | Minus | Plus | Minus | Plus | Minus | |
1/8– 21/2 IPS | By Wt. | 12.5 | By Wt. | 12.5 |
Available Only As Seamless Pipe |
20.0 | 12.5 | |
3 IPS | By Wt. | 12.5 | By Wt. | 12.5 | 18.0 | 12.5 | ||
31/2 IPS-18 OD | By Wt. | 12.5 | By Wt. | 12.5 | 15.0 | 12.5 | ||
20 OD-26 OD | By Wt. | 12.5 | By Wt. | 12.5 | 17.5 | 10.0 | ||
(1) Specification A120 had been discontinued.
|
Weight – Steel Pipe Tolerances – Seamless & Welded
Nominal Pipe Size Inches | Outside Diameter Tolerances-Inches Or Percent of O.D. | |||||||
---|---|---|---|---|---|---|---|---|
A120(1) | A53 | A106 | API-5L | |||||
Plus | Minus | Plus | Minus | Plus | Minus | Plus | Minus | |
Standard | 10 | 10 | 10 | 10 | 10 | 3.5 | 10 | 3.5 |
Extra Strong | 10 | 10 | 10 | 10 | 10 | 3.5 | 10 | 3.5 |
Dble Extra Strong | 10 | 10 | 10 | 10 | 10 | 3.5 | 10 | 3.5 |
(1)Specification A120 has been discontinued. (2)Pipe 4″ & under is weighted in conventional lifts, over 4″ in individual lengths.
|
Steel Pipe Tolerance Typical Properties
Grade Designation | Chemistry | Tensile KSI | Yield KSI | Elong. Percent In 2″ | ||||
---|---|---|---|---|---|---|---|---|
C | Mn | P | S | Si | ||||
A1068 Smls. | .30 max | .29-1.06 | .048 max | .058 max | .10 min | 60 min | 35 min | 30 min |
A53B Smls. | .30 max | 1.20 max | .05 max | .06 max | – | 60 mm | 35 mm | 30 min |
SLB Smls. | .27 max | 1.15 max | .04 max | .05 max | – | 60 min | 35 min | 30 min |
A120 Weld. | No Values Specified |
No Values Specified |
[top]
Send Enquiry Now
- 168#, Miao Qian Xi Jie, Yue Xiu District, Guangzhou, China
- ENQUIRY@HYSTEELPIPE.COM
- CONTACT US HERE !